Need help?Do you have a question about the Code Alarm CA100 and is the answer not in the manual?
General| Model | CA100 |
|---|---|
| Remote Control | Yes |
| Shock Sensor | Yes |
| Starter Kill | Yes |
| LED Status Indicator | Yes |
| Remote Start | No |
| Panic Mode | Yes |
| Valet Mode | Yes |
| Type | Security System |
| Operating Voltage | 12V |
How to arm the CODE alarm system by pressing the LOCK button on the transmitter.
Details on the passive arming feature where the system arms automatically after a 30-second delay.
Explains how the system protects the vehicle and what happens when entry points are triggered.
Procedure to disarm the CODE alarm system using the key chain transmitter.
Interpreting LED flash patterns to identify the cause of an alarm trigger.
How to temporarily bypass all alarm functions using the valet switch.
Disarming the system without a transmitter, typically when the transmitter is lost or fails.
Instructions on how to selectively or permanently eliminate system chirps.
Using the transmitter's LOCK button as a panic switch for emergencies.
Operating optional features like trunk release via the UNLOCK button.
How the anti-hijack mode is initiated and its operational sequence.
Procedure to disarm the anti-hijack mode using a hidden push button switch.
Summary of what different LED flashing patterns on the dash indicate.
Meaning of different siren chirp counts during arming and disarming.
Interpretation of parking light flashes for system status and events.
Details of the warranty coverage, exclusions, and limitations for the product.
To Next Page
