EasyManua.ls Logo

CODE HOMME ACT928823016 - General Features; Intended Use; Using the Appliance

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 1. Place one of the three
attachments on body.
Step 2. Lock attachment.
4
GENERAL FEATURES
Please read these instructions carefully before using this product and
keep them in a safe place for future reference.
1. Trimmer
2. Precision trimmer
3. Shaver
4. Combs: 3 Combs with height adjustment
5. Button ON and OFF
6. USB charging cable
7. Cleaning brush
8. Comb
9. Base store for trimmer and accessories
IN THE BOX
• Rechargeable trimmer
• 3 different heads: trimmer, shaver and precisiontrimmer
• 3 combs
• Base
• Comb
• Cleaning brush
• User manual
USE
What to do before  rst use:
• Remove the packaging material and inspect the device for damage.
• Do not operate the device if it is damaged in any way. Return it to your seller immediately.
• Never expose the trimmer to temperatures below -10°C or higher than +40°C for long periods of
time.
• In order to get an ideal cutting effect, check all accessories of product, as well as clean and
maintain the product.
INTENDED USE
• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• To remove an attachment, hold the trimmer with one hand and gently rotate the attachment to
the right with your other hand. Now you can take off the attachment. Put on a new attachment
and rotate it to the left to lock it in position. When (un)locking the attachment you can hear a
gentle ‘click’, the indication stripe of the attachment and body are now aligned.
• The hair must be clean and dry when being cut.
• Only cut small amounts at one time.
• Cut the hair with progressively closer settings until you reach the desired length.
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.
USING THE APPLIANCE
• Attach the accessory which is to be used in the appliance.
To withdraw hold the hair trimmer with both hands and press the blades out with your thumb and support the blades to avoid falling.
• Select the accessory depending on your needs.
• Attach the accessory to your hair trimmer.
Turn on the appliance. To turn on the appliance, press the switch On / Off upwards. Hold the appliance in your palm with an angle
perpendicular to the plane of the skin (90°). There is no need to apply much pressure on the appliance.
• Just let the appliance touch the surface of your skin gently.
• Move the appliance closer to the area to be trimmed and move the appliance up and down gently to trim the hairs.

Table of Contents

Related product manuals