This document describes the CODE HOMME RECHARGEABLE PRECISION HAIR CLIPPER, a versatile grooming tool designed for precision hair trimming.
Function Description:
The CODE HOMME Rechargeable Precision Hair Clipper is a personal grooming appliance primarily designed for shaving hair, beard, neck, and chest. It is not recommended for use as a professional hair clipper for cutting head hair or for cutting artificial hair. The device operates on direct current (DC) and is equipped with a high-speed motor for efficient trimming. It features a trimmer blade and comes with four adjustable limit combs (1, 2, 3, and 4 mm) to achieve desired hair lengths. The clipper is rechargeable, making it convenient for cordless use.
Important Technical Specifications:
- Power Supply: 3.7V DC
- Power Consumption: 5W
- Motor: High-speed motor (FF-180PA-2192V) with a speed of 6800 ± 10%
- Battery: 600mAh lithium battery
- Charging Time: Approximately 3 hours for a full charge
- Maximum Shaving Time: Approximately 90 minutes on a full charge
- Charging Interface: USB Type-C charging cable
- Included Accessories: Cleaning brush, 4 limit combs (1, 2, 3, and 4 mm), USB Type-C charging cable, user manual.
- Protection Class: IEC protection class III
Usage Features:
Before first use, the appliance must be fully charged. Ensure the appliance is turned off during charging. Insert the USB charging cable connector directly into the appliance's power jack and connect the USB charging cable to a mains adapter plugged into a wall socket. The indicator light will illuminate to show charging, but it will not turn off once fully charged. The battery is non-removable.
To use the appliance, attach the desired limit comb (1, 2, 3, or 4 mm) by firmly clamping it onto the appliance with your thumb. The length is indicated on the combs. To remove or replace a comb, push it upwards with your thumb.
To turn on the appliance, press the On/Off switch upwards. Hold the appliance in your palm at a 90° angle perpendicular to the skin. There is no need to apply excessive pressure; simply let the appliance gently touch the surface of your skin.
For optimal results, ensure hair is clean and dry before cutting. Cut small amounts of hair at a time. Progressively use closer settings until the desired length is achieved. The cutting head may jam if you work too quickly or attempt to cut too much hair at once. Allow the appliance to run for a short time before beginning to cut.
For precision trimming of a beard (including hard-to-reach parts) or clean shaving of hair over the temples and neck, the cutting head can be used without any attachment. To do this, remove the attachment and draw the cutting head at a shallow angle along the skin without applying pressure.
Maintenance Features:
Regular cleaning and maintenance are essential for optimal performance and longevity of the clipper.
- Turn Off and Cool Down: Always turn off the appliance and allow it to cool completely before cleaning.
- Remove Accessories: Before cleaning, remove any attached accessories and the used blade.
- Clean with Brush: Use the provided cleaning brush to remove hair from the blade and other parts.
- Clean Triple Shaving Head (if applicable): If the device has a triple shaving head, open it and remove all hair using the cleaning brush.
- Wipe Body: Clean the appliance body with a damp cloth and then dry it thoroughly.
Important Safety Cautions:
- Do not use the appliance near water (washbasins, bathtubs, showers, or other vessels containing water).
- Do not operate the appliance with wet hands or if it is wet, as this may cause electric shock or injury.
- Keep the appliance and power cable dry.
- Keep out of reach of children. Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, may use the appliance only under supervision and after receiving instructions on safe use and understanding the risks involved. Children should not play with the appliance, and cleaning/maintenance should not be performed by children without supervision.
- Do not store or use the appliance in humid areas.
- Do not operate the appliance in the presence of explosive and/or flammable fumes or liquids.
- Do not attempt to repair or disassemble the appliance. If the USB charging cable is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid risks.
- Do not use attachments not recommended by the manufacturer.
- Do not use an extension cord; plug the adapter directly into the electrical outlet.
- Keep the USB charging cable away from heated surfaces.
- Unplug the appliance if not in use for a long time, if it malfunctions, during thunderstorms, or when cleaning.
- Do not wash the appliance body or power adapter with water or expose them to water to avoid electric shock or short circuit.
- The power adapter must be unplugged from the mains socket before maintenance.
- This product contains sharp blades; exercise utmost care when handling and using it.
- Incorrect handling of batteries can lead to explosion or acid burns. Avoid contact of battery fluid with skin, eyes, and mucous membranes. In case of contact, rinse immediately with plenty of clean water and consult a doctor if an unexpected reaction occurs.
- Dispose of packaging materials properly by recycling them.
- If transport damage is noticed upon unpacking, contact your dealer immediately.
- The product contains non-replaceable batteries.
- Dispose of the device and its battery responsibly at an approved waste or recycling facility. Do not dispose of old batteries with household waste.
To Next Page
Need help?
General
