17
pã~êíaêáîÉ=`çåÑáÖìê~íáçå=
oÉãçîÉ=íÜÉ=pã~êíaêáîÉ=Ñçê=mêçÑáäÉ=bÇáíáåÖ=
1. If the SmartDrive is installed in the Controller, shut down Virtua C and remove
the SmartDrive.
2. Insert the SmartDrive in a PC.
pÉí=kÉíïçêâ=fåÑçêã~íáçå=
1. Use a text editor to edit the file: \profiles\network\network.default.txt.
2. Make desired changes to:
• ipAddress (the default static IP address is 192.168.1.202).
• gateway — consult your network administrator for this value or leave the
default value if a gateway is not used.
• netmask — consult your network administrator for this value or leave the
default value.
p~ãéäÉ=ÑáäÉW=åÉíïçêâKÇÉÑ~ìäíKíñí=
NOTE: The highlighted parameters should be changed for typical installations.
[ NetworkProfile ]
ipAcquisitionType_ = static
ipAddress_ = 192.168.1.202
gateway_ = 192.168.1.254
netmask_ = 255.255.255.0
networkName_ = VIRTUA_1_202
port_ = 104
isBehindFirewall_ = false
doUseDefaultNetworkName_ = true
speedDuplex_ = 0
firewallEnabled_ = false
httpFirewallPortOpen_ = true
telnetFirewallPortOpen_ = false
smbFileShareFirewallPortOpen_ = true
ipAliasingEnabled_ = false
additionalIpAddresses_ = 0
To Next Page
Loading...