Preface
ix
Preface
This is the Operator’s Manual for the DIAMOND™ C-20 and C-30
Liquid-Cooled OEM/Industrial carbon dioxide (CO
2
) lasers manu-
factured by Coherent. These lasers are OEM systems; they are
designed as components which are to be integrated by the original
equipment manufacturer (OEM) prior to delivery to the end user.
Coherent strongly recommends that the user read
Section Two: Laser Safety, before operating the laser.
WARNING!
Use of controls or adjustments or performance of procedures
other than those specified in this manual may result in
hazardous radiation exposure.
Export Control
Laws
Compliance
It is the policy of Coherent to comply strictly with U.S. export
control laws.
Export and re-export of lasers manufactured by Coherent are subject
to U.S. Export Administration Regulations, which are administered
by the Commerce Department. In addition, shipments of certain
components are regulated by the State Department under the
International Traffic in Arms Regulations.
The applicable restrictions vary depending on the specific product
involved and its destination. In some cases, U.S. law requires that
U.S. Government approval be obtained prior to resale, export or
re-export of certain articles. When there is uncertainty about the
obligations imposed by U.S. law, clarification must be obtained
from Coherent or an appropriate U.S. Government agency.
Products manufactured in the European Union, Singapore,
Malaysia, Thailand: These commodities, technology, or software are
subject to local export regulations and local laws. Diversion contrary
to local law is prohibited. The use, sale, re-export, or re-transfer
directly or indirectly in any prohibited activities are strictly
prohibited.
To Next Page
Loading...
Need help?
General
