Coinco Vantage Series User Manual

1
Vantage™ Series Bill Acceptor
Installation & Operation Guide
Model
#
Voltage Hertz Amps Interface
VAx1
110VAC
60Hz
0.7A rms
(max)
2.5A rms
(max)
Amusement Pulse,
Vend Serial
VLx1
Pulse, Parallel,
Vend Serial, MDB
VLx2
24VAC
Pulse, Parallel,
Vend Serial,MDB
VXx3
34VDC NA
1.8A
(max)
MDB
Input Power and Interfaces
Introduction
The Vantage™ Series bill acceptors represent
another milestone in Coin Acceptors, Inc. history of
innovation. These advancements continue to provide
Coinco customers with improved reliability, simplifi ed
route operations, and increased profi tability.
Product Overview and Features
The Vantage acceptor incorporates a wide range of
benefi ts, including:
• Quick-Release Bezel speeds installation and
removal.
• Optional FlexStack™ bill box expands from
200 bills to hold up to 500 bills. Fixed note
bill boxes are available with between 300 and
1100 note capacities.
• Illuminated bezel and status indicators simplify
setup and troubleshooting.
• Patented note path lockout provides high
security Level Three stringing and fi shing
protection.
• Smart Bezel™ feature (optional) actively
communicates ability to accept $5 bills.
For Your Records
A label indicating the model number and serial
number can be found on the side of the Vantage bill
acceptor. Refer to the model number and serial
number whenever you call your Coinco Service
Center for information or service.
The fi rst four digits of the bill acceptor serial number
indicate when the unit was built, which is also the
beginning of the warranty period:
• First two digits: indicate week of manufacture.
• Third and fourth digits: indicate the year.
For example, Serial number 1508000123 indicates
the unit was manufactured in the 15th week of 2008.
Figure 1
Bill Acceptance
xxxxx
Vx7xx5xCA
xxx
72mm
Vx7xx3xCA
xxxxxx
Vx6xx6xUS
xxxx
Vx6xx4xUS
xx
66mm
Vx6xx2xUS
$100 $50 $20 $10 $5$1
Bill
Width
Model
xxxxx
Vx7xx5xCA
xxx
72mm
Vx7xx3xCA
xxxxxx
Vx6xx6xUS
xxxx
Vx6xx4xUS
xx
66mm
Vx6xx2xUS
$100 $50 $20 $10 $5$1
Bill
Width
Model
Quick
Release
Bezel Tab
Data Port
Service Mode
Button
Diagnostic
LED
Harness
Connection
(MDB)
Bill Inlet LEDs
Inlet Bezel
Harness
Connection
(Non-MDB)
Billbox
Billbox
Access
Lid
Billbox
Release
Option
Switches
(Far Side)
Vantage™ Components

Coinco Vantage Series Specifications

General

Brand	Coinco
Model	Vantage Series
Category	Payment Terminal
Language	English

Summary

Product Overview and Features

Key Features

Highlights of the Vantage bill acceptor, including quick-release bezel, expandable bill box, and illuminated indicators.

Vantage Components and Identification

Vantage Components Diagram

Diagram illustrating the main physical components of the Vantage bill acceptor, such as the billbox and harness connections.

Bill Acceptor Identification

Information on locating the model and serial number for service and warranty, including serial number decoding.

Installation and Operation

Unpacking and Inspection

Instructions for removing the bill acceptor from its shipping carton and inspecting for damage.

Installing the Bill Acceptor

Step-by-step guide for physically installing the bill acceptor into the host machine and connecting it.

Quick Release Bezel Operation

Procedure for detaching and reattaching the bill acceptor's bezel using its quick-release mechanism.

Configuration and Settings

Configuring Bill Acceptance Options

Guide to changing bill acceptance settings like coupon acceptance, security levels, and bezel lighting.

Option Navigation and Settings

Explains how to navigate configuration menus using the service mode button and diagnostic LEDs.

Advanced Features and Maintenance

Smart Bezel Options

Details on the Smart Bezel feature that communicates accepted bill denominations to the customer.

Lower Housing Removal

Instructions for removing the lower housing to access internal components or settings.

Vantage Cleaning and Maintenance

Recommended procedures and materials for cleaning the bill acceptor to ensure optimal performance.

Diagnostic Flash Codes

Table listing diagnostic LED flash codes and their corresponding validator status for troubleshooting.