1 Warranty
Thank you for purchasing a Cole-Parmer instrument. In normal use conditions, the instrument is
guaranteed for a period of 24 months started from the date of purchase.
The warranty is valid only if the product is original. It does not apply to any product or parts of it that
have been damaged due to incorrect installation, improper connections, improper use, accident or
abnormal conditions of operation.
The manufacturer declines all responsibility for damage caused by failure to follow instructions, lack
of maintenance and any unauthorized modification
2 Contents of package
The instrument is delivered complete with the following parts:
⚫ Vacuum Oven (main unit).
⚫ 2 stainless steel wire shelves (3 stainless steel wire shelves with Bov-90)
⚫ Power supply cable
⚫ 2 cores of fuse
⚫ Connecting vacuuming pipes (interior diameter: Φ14mm thickness of the wall:8 mm)
⚫ Wrench
⚫ Vacuum pump(optional)
⚫ User manual
3 Installation requirements and safety tips
3.1 Installation requirements
The instrument should be installed in follow conditions:
1. Ambient temperature between 41°F（5°C）and 104 °F（40°C）, and relative humidity maximum of
85%.
2. Atmospheric pressure: 86～106 KPa.
3. The instrument should be placed on a stable level with no serious dust, direct sunlight, or corrosive
gases indoor.
4. Leave enough space around the product (more than 50cm). Do not place the instrument below the
fire alarm.
5. Power feed between 110V～120V/60Hz.
6. Respect enough spaces around the instrument, and the weight of the instrument depends on
number of shelves. Make sure the shelves will not be bended or deformed. Samples must directly
with the shelf.
To Next Page