Coleman Powersports UT250-2 User Manual

Periodic Service
10-4
■ Checking Coolant Level
IMPORTANT
 If the radiator cap has to be removed, follow
the cautions above and securely retighten
the cap.
 Use clean fresh water and anti-freeze to fill
the recovery tank.
 If water should leak, consult your local
Coleman service center.
■ Cleaning radiator screen
WARNING
TO avoid personal injury:
 Be sure to stop the engine before
removing the screen
1. Park the vehicle on a flat surface,
2. Remove the radiator cover,
3. Detach the screen and remove all foreign
materials.
① Radiator screen
IMPORTANT
 Radiator screen must be cleaned from
debris to prevent engine from overheating
■ Checking brake fluid level
WARNING
TO avoid personal injury:
 Never operate the vehicle if the brake
fluid is below the minimum mark.
 Use only DOT3 from a sealed container.
Other types of brake fluid may ruin
synthetic resin or rubber installed in
brake system components and may
cause brake failure.
 Avoid contamination of the brake fluid
thoroughly clean before removing the
filler cap. Do not open the brake fluid
reservoir cap unless absolutely
necessary.
Use extreme care when filling the reservoir. If
brake fluid spills on the power steering hose,
wash it off with water immediately, as brake
fluid quickly ruins synthetic resin or rubber
hoses.
1. Park the vehicle on a level ground and open
the hood.
2. Check to see that the brake fluid level is up
to the MIN mark.
3. If it is below the “MIN” mark add brake fluid .
① MAX ② MIN

Coleman Powersports UT250-2 Specifications

General

Brand	Coleman Powersports
Model	UT250-2
Category	Offroad Vehicle
Language	English