AMERICAN HERITAGE
®
WEATHERMASTER
®
CABIN 12'X9'
1
Layout & Positioning of Tent
– Layout and position tent with door
facing desired direction. (illus. 1)
– Stake down tent, starting with
the corners. Do not stretch
too tight. Angle the stakes
slightly toward the tent.
(illus. 2) Keep the floor taught.
– Unzip the door.
2
Assemble & Place Roof Poles
– Assemble all chain shock-corded
roof poles. When assembled will
form a continuous arch with both
ends pointing down. (illus. 3)
– Insert the curved ridge roof poles
through the roof pole sleeves.
(illus. 4)
When You Are Ready
To Set Up Your Tent
– Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
– Do not set up your tent
under trees.
– For best results in windy
conditions, position the end
of tent into the wind.
(3) Curved Ridge Roof Poles
Part No. 9232B401
(4) End Brace Poles
Part No. 9232B110
(2) Center Adjustable- Poles
(Red Sticker) Part No. 9232B109
(2) Center Brace Poles
(Red Sticker) Part No. 9232B410
Rainfly Part No. 9232B400
Instructions apply to Part Number 9232B129
illus. 3 Curved roof pole assembly.
illus. 4 Curved roof pole system shown
inserted through pole sleeves.
illus. 2
Stake loops
properly staked
Front door
Roof sleeve
illus. 1
Pole sleeves
Shock-corded poles
Forms an arch
POLE ASSEMBLY PARTS
To Next Page
Need help?
General