Coleman CampVac - Inflating with CampVac; Inflating Items; Deflating with CampVac; Deflating Items

1. To begin ination, open
external cap and pull rmly on
the lanyard to extend out. This
will open internal yellow seal.
Inflating Coleman
®
Double Lock™ Valve
About the Battery
This product uses a lead acid, sealed, rechargeable battery. The battery
pack is recyclable. At the end of the battery pack’s useful life, the unit
should be recycled or properly disposed of. Do not discard in a landfill
or incinerate. Contact your local city ofcials for battery disposal
information. If a battery collection program does not exist in your area,
call Coleman toll free at 1-800-835-3278 for battery disposal information.
2. Attach adapter nozzle to
ination end of pump. Insert
pump and turn on.
Note: The pump may look
different from yours. It is for
illustration purposes only.
To Inflate:
• Connect the Inflate/Deflate
Adapter to the Inflate Port as
shown below. The snaps will
“click” when the Inflate/Deflate
Adapter is fully inserted into the
product.
• Turn pump ON.
• Turn pump OFF when product
is fully inflated.
To Deflate:
• Connect the Inflate/deflate
Adapter to the Deflate Port
as shown below. The snaps
will “click” when the Vacuum
Adapter is fully inserted into the
product.
• Turn pump ON.
• Turn pump OFF when product
is fully deflated.
Inate/Deate
Adapter Connected
to Inate Port
Inate/Deate
Adapter Connected
to the Deate Port
3. When fully inated, seal valve
by pushing in with pump
nozzle. This will seal the
internal yellow stopper and
keep air from escaping while
closing cap. Gently twist
adapter sleeve to right while
backing pump out of valve.
4. Fully remove pump and close
external cap. Valve should
appear depressed into itself.