6
ENGLISH
Care and Maintenance
1. Changing the bag
Never use the vacuum cleaner without a dust bag. If you forget to insert a dust bag or insert one incorrectly
you will not be able to close the lid of the vacuum cleaner properly.
1. Detach the suction hose from the vacuum cleaner.
2. Open the lid of the vacuum cleaner.
3. Remove the dust bag.
4. Insert a new dust bag.
5. Close the lid and reattach the suction hose.
2. Emptying the dust collector
1. Detach the suction hose from the vacuum cleaner.
2. Open the lid of the vacuum cleaner.
3. Lift the dust collector straight up.
4. Empty and replace the dust collector. Close the lid and
reattach the suction hose.
3. Cleaning the air intake filter (internal filter)
• Disconnect the plug from the wall socket before cleaning the lter.
• The lter should be cleaned at least twice a year or whenever it looks dirty.
• Never use the machine without a lter. Using the machine without a lter can result in reduced suction or
damage to the motor.
• Allow the lter to air dry.
• If the lter needs to be replaced, use universal lter 34-4442. The lter can be cut to size using the old
one as a template.
1. Open the lid and slide the dust bag upwards.
2. Remove the air lter by sliding it upwards.
3. Rinse the lter in lukewarm water and then allow it to air dry.
4. Replace the lter.
To Next Page
Loading...