Need help?Do you have a question about the Coloelite UC–711 E and is the answer not in the manual?
General| Brand | Coloelite |
|---|---|
| Model | UC–711 E |
| Category | Ice Cream Maker |
| Language | English |
Steps to remove the freezer from its shipping carton and pallet.
Guidelines for placing the freezer in its final location, considering airflow and leveling.
Details on wiring, grounding, and voltage compliance for safe operation.
Final steps including calibration by a technician and reinstallation of panels.
Details on the touch pad, indicator lights, modes, and monitor functions.
Operation of the dispensing handle and safety features.
Function of the photo sensor switch for activating beater/auger motor.
Safety feature preventing operation with dispensing head removed.
Overview of components within the electrical control panel.
Explanation of solenoid valves and safety switches for refrigeration.
Step-by-step guide for disassembling and cleaning gravity fed components.
Steps for disassembling and cleaning pump fed machine components.
Detailed instructions on how to take apart the dispensing head for cleaning.
Procedure for removing and disassembling the beater and auger assembly.
Instructions for washing, rinsing, sanitizing, and air-drying parts.
Detailed guide on reassembling the beater and auger parts.
Instructions for reassembling the dispensing head components.
Guide for correctly assembling the gravity feed tube parts.
Detailed steps for assembling the mix injection pump.
Comprehensive steps for sanitizing the freezer with approved solutions.
Instructions for filling and starting gravity fed machines.
Steps for filling and priming pump fed machines.
How to use and benefits of the Stand-By mode for energy saving.
Details on the gravity feed tube and adjusting overrun.
How to adjust mix injection and overrun for pump fed machines.
Steps for periodic cleaning of gravity fed machines with frozen mix.
Procedures for periodic cleaning of pump fed machines.
Technical details about the compressor, refrigerant, and valves.
Information on motor type, rotation, and operating voltage.
Specifications for the thermal overload protector.
How to adjust the sensitivity of the proximity switch.
Guidelines for basic maintenance, lubrication, and part handling.
Recommended schedule for replacing parts like orings, seals, and blades.
Common problems and solutions for gravity fed freezers.
Common problems and solutions for pump fed freezers.
Explanation of safety alarms, their codes, and actions to take.
To Next Page