Need help?Do you have a question about the Colordyne 1600-S and is the answer not in the manual?
Instructions on how to unpack the printer and set it up.
Instructions for installing the printer driver software on a computer.
Step-by-step process for installing the ink tanks into the printer.
Detailed instructions for safely installing the printhead cartridge.
Details common problems and solutions for media feeding issues.
Troubleshooting specific issues related to the Memjet printhead.
Lists and resolves various output and print quality issues.
Steps for clearing paper jams and preventing future occurrences.
Details error codes and their corresponding actions.
Explains settings and options within the printer driver.
Guide on accessing and using the printer's software toolbox.
Procedure to adjust the drive belt tension for proper operation.
Procedure for replacing the motor drive belt or the motor itself.
Detailed steps for replacing the feed rollers.
Procedures for replacing the printer's delivery rollers.
Instructions for replacing the paper path motor or drive belt.
How to replace the printer's ink tanks when they run out.
Procedures for cleaning and replacing the printhead cartridge.
Instructions for replacing the ink revolvers.
Procedures for cleaning and replacing the service station.
Steps to remove the service station from the printer.
Detailed cleaning instructions for service station components.
Procedures for reinstalling or replacing the service station.
General cleaning procedures for the printer's interior and exterior.
Cleaning procedures for various parts within the print engine.
To Next Page
General