Charging the Mic
Insert the small connector of the supplied micro-USB cable into the USB
charging port on the underside of the mic. Insert the large connector into
the USB port on a computer, a USB charging device, or a 5V USB adapter
(not included) and plug into a wall socket.
On low battery, a tone will be periodically heard, indicating that the mic
needs to be charged.
Powering ON/OFF
• Press and hold the [ ] button to power the microphone ON and OFF.
Changing Input Modes
• Press the [ ] button to switch input modes.
Bluetooth Pairing
1. Power the mic ON. A tone will be heard indicating that the mic is
powered ON. After a moment a voice will be heard indicating the mic
is in Bluetooth mode.
2. Set your mobile device to search for Bluetooth devices. When it
appears, select CWPD461MIC from the list of found devices.
3. After a successful pairing, you will be able to play music through the
microphone’s speaker.
Adjusting Playback & Volume
• Press the [ ] button to pause/resume playback.
• Press the [ ] and [ ] buttons to skip tracks.
• Press the [ ] and [ ] buttons to adjust volume.
Getting Started
To Next Page
Loading...