.,.To
Change Your Rear Seat
Height
(Tools Needed:
•
3/16" Allen
Wrench
)
1. Loosen and remove the two Allen Screws and two
Washers.
2. Adjusting the height of axle
plate.
Reposition the axle plate to the desired height.
Then reinstall the two Allen Screws and two
Washers.
Position of the Axle Plate and Allen Screws
L{
)
L{)
3. Securely tighten the two Allen Screws and
Washers.
*Left and right axle plate must be the same.
To Next Page
Loading...