Need help?Do you have a question about the Coltene BioSonic UC125 and is the answer not in the manual?
General| Brand | Coltene |
|---|---|
| Model | BioSonic UC125 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Attach the display module to the unit and secure it with screws.
Connect the unit's power cord to a grounded AC outlet.
Choose the language for the LCD display using arrow keys.
Set the current time on the UC125 using arrow keys.
Set the current date on the UC125 using arrow keys.
Ensure the drain valve is closed before filling the unit.
Add the specified cleaning solution and water to the tank.
Replace cleaning solution daily or when visibly soiled.
Drain the unit by opening the drain valve.
Press the DEGAS key to initiate the degassing cycle.
The unit cycles for five minutes, displaying "Degas On".
The display shows "Degas Complete" when the process finishes.
Clean items placed directly in the tank using baskets or racks.
Clean specialized items using beakers suspended in the tank.
Clean instruments placed in cassettes using a wire rack.
Drain instruments using the tank bezel.
Press SOLUTION RESET key after changing cleaning solution.
Verify the solution timer resets to zero on the LCD.
Use directions for the large instrument basket.
Use directions for the medium basket for instruments or beakers.
Instructions for using beaker holders for cleaning.
Daily cleaning procedures for the unit and tank.
Check the power cord for damage and secure connectors.
Procedure for accessing and replacing the unit's fuse.
Technical specifications for the UC125 unit.
The operating frequency of the ultrasonic cleaner.
Information on the tank's capacity for solution.
Overall and tank dimensions of the unit.
Details on the warranty terms and conditions for the product.
Procedure for reporting damage incurred during shipping.
To Next Page
