EasyManua.ls Logo

Colzer AP009 - Page 11

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLEANING AND MAINTENANCE
1. Turn the air purifier off and unplug it before cleaning.
2. The outside of the air purifier can be cleaned with a soft, clean
dampened cloth.
3.The filtered air outlet and air inlet grill on the unit can be cleaned of
dust with a small, soft brush.
4. If you wish to clean the inside of the air purifier, please only use a dry,
soft cloth to wipe it down.
5. Do not wash the HEPA filter.
WARNING: Do not allow moisture to come in contact with the main
housing of the air purifier.
FILTER REPLACEMENT INSTRUCTIONS
1.On average, HEPA filter and activated carbon filter need to be replaced
every 3-6 months. Filter life will vary depending on air quality and usage.
2. Turn off and unplug the air purifier before attempting to replace the filters.
3. Open the bottom cover and take out the old HEPA.
4. To replace the HEPA filter,discard the old HEPA filter. Do not attempt to
clean. And then install a new HEPA filter well in position, make sure that
the primarily efficient filter shall be pointed outwards.
5. Screw back the bottom cover in position.
10

Related product manuals