Specification
Product Name
Model NO.
Input Voltage
Output
Rated Power
Noise Level
HEPA level
Size
Filter Replacement Indicator
Air Purifier
AP009
100-240V
12V/1A
12W
＜45dB
H13
230*250*320mm
Yes
Pre-operating instructions
1. Carefully unpack your air purifier.
2. Select a firm level place where there are no obstructions to the air inlet
or filtered air outlet.
3. Open the bottom cover and take out the HEPA.
4. Detach the HEPA filter and remove the PE bag carefully.
5. Replace the HEPA filter back in position, make sure that the primarily
efficient filter shall be pointed outwards.
6. Screw back the bottom cover in position.
Important:
• Remove all PE bags from filters before use.
• Do not point air outlet towards wall.
05
To Next Page
Loading...
