EasyManua.ls Logo

Colzer KJ800 - User Operating Guidance; Filter Replacement Procedure

Colzer KJ800
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Instructions
Filter Replacement
Shut down and power off the main unit. (Figure 1)
Open the door cover, catch the button position of the door cover, and pull
it out. (Figure 2)
Remove the filter in turn and wrap the waste filter with a garbage bag to
prevent the pollutants on the filter from falling into the room. (Figure 3)
Grab the door cover buckle, align the bottom of the door cover with the
groove at the bottom of the main unit, then close the door cover and plug
in the power to run. (Figure 4)
Please reset the filter reminder after the filter is replaced. (For details,
please refer to the detailed description on page 5.)
Figure 1 Figure 2 Figure 3 Figure 4
Initial Effect Filter Composite Filter
Note:
a. Dispose of the used filter as non-burnable waste.
b. The primary filter can be used repeatedly. Please clean it and dry it.
Note:
1. Please read the filter replacement operation in detail to ensure the purification
effect of the air purifier.
2. Before cleaning the air purifier system, unplug the power cord and cut off the
power to the air purifier system.
3. Keep the inside of the air purifier dry to prevent damage to the circuit.

Related product manuals