Need help?Do you have a question about the Comanche PIPER PA-24 and is the answer not in the manual?
Details engine specifications like horsepower, displacement, and RPM.
Outlines key performance metrics: speed, climb rate, service ceiling, and top speed.
Provides data on gross weight, empty weight, and useful load for different configurations.
Describes the landing gear system, including wheel base, tread, and tire pressure.
Details engine type, propeller models, and their operational characteristics.
Outlines essential pre-flight inspection procedures for safety.
Provides step-by-step instructions for starting the aircraft engine.
Guides the pilot through the take-off process, including flap settings and speeds.
Outlines procedures for approaching and landing the aircraft safely.
Details critical emergency procedures for various in-flight scenarios.
Explains the manual process for extending the landing gear.
Lists steps to take in the event of engine failure during flight.
Charts showing take-off distances for the PA-24-180 model under various conditions.
Charts showing take-off distances for the PA-24-250 model under various conditions.
Charts detailing landing distances for the PA-24-180 model under various conditions.
Charts detailing landing distances for the PA-24-250 model under various conditions.
General| Manufacturer | Piper Aircraft |
|---|---|
| Model | PA-24 Comanche |
| Type | Light aircraft |
| First Flight | 1956 |
| Maximum Takeoff Weight | 2, 900 lb (1, 315 kg) |
| Engine | Lycoming O-540 |
| Horsepower | 250 hp |
| Variants | PA-24-180, PA-24-250, PA-24-260, PA-24-400 |
| Seating | 4 |
| Engine Manufacturer | Lycoming |
| Wingspan | 36 ft (10.97 m) |
| Cruise Speed | 160 mph (257 km/h) |
To Next Page