CSB200 Class B AIS
R4.0 15
Error
This is a red LED which indicates, when lit, one of the following status
conditions is possible:
Transmitter lockout timer (1 second maximum) has operated
GPS is unable to gain lock after 30 minutes
VHF antenna VSWR is out of range
Power Supply is out of range
Background noise level is above the threshold level (-77dBm)
TX Off
This is a Blue LED which indicates that the remote TX Off switch has
been operated to manually stop the CSB200 transmitting data.
MAINTENANCE
WARNING: Unauthorized opening of the CSB200 unit will invalidate the
warranty.
CAUTION: Avoid using chemical solvents to clean the CBS200; solvents
may damage the case material.
NOTE: The CSB200 contains no serviceable parts. Contact your local
Dealer if the unit fails to function correctly.
To Next Page
Loading...
