CombiUSA.com
CAR SEAT ATTACHMENT INSTRUCTIONS
ATTACHING THE COMBI
®
SHUTTLE
™
INFANT SEAT
DETACHING THE COMBI
®
SHUTTLE
™
INFANT SEAT
STEP 1: Squeeze center of red lever located on the
back of the Combi Shuttle infant carrier while lifting
carrier upwards to release from stroller.
STEP 1: Recline the backrest to the lowest position.
STEP 2: Snap carrier attachments onto both armrest.
Pull up on attachments to conrm they are attached
securely.
STEP 3: Insert Combi Shuttle infant carrier into the
stroller, pressing down on both sides of carrier until it
locks onto the carrier attachments.
STEP 4: Be certain that the Combi Shuttle is securely
attached to the stroller by lifting up on the car seat
handle.
STEP 2: To remove attachments, pull both sides
of attachments away from stroller arm while lifting
upward to remove.
WARNING: TO AVOID FINGER ENTRAPMENT, ALWAYS remove carrier attachments when
you are not using the Combi Shuttle Infant Carrier.
Combi Car Seat Adapters are compatible with the following infant car seats: Combi
®
Shuttle, Combi
®
Shuttle 33,
Combi
®
Navette 22