To Next PageTo Next PageWhy is my Combi Flex difficult to steer?
To resolve steering difficulties or if your Combi Stroller pulls to one side: * Ensure no items are hanging from the handle. * Distribute weight evenly in the basket. * Verify that the brakes are not locked. * If needed, clean the wheels and apply silicone.
What to do if Combi Flex is difficult to get up curbs?
To get your Combi Stroller up curbs, pull the handle up to lift the rear wheels onto the curb, then pull the stroller backward until the front wheels clear.
The primary structure of the stroller, forming the base for other components.
The protective cover for the child, shielding them from sun or light rain.
An accessory for the stroller, likely for storage or comfort.
The two front wheels of the stroller, designed for maneuverability.
The two rear wheels of the stroller, providing stability.
The safety bar in front of the child, often used for securing them.
Parts used to connect Combi infant car seats or accessories.
Components for attaching the Combi Shuttle infant carrier.
Follow general safety rules like using harness, not leaving child alone, and avoiding restricted uses.
Observe weight limits for basket/pockets and ensure proper infant car seat attachment.
Ensure safe operation by maintaining walking speed, securing child, and being careful during folding.
Pull the latch upwards to release it before opening the stroller.
Grip handles, turn outward, and push the safety lock lever to open the stroller.
Connect canopy holders until they click and fasten velcro straps around the handle.
Release canopy holders by squeezing the male part and pulling upwards.
Insert stroller leg into wheel assembly until the pin locks into the opening.
Place front swivel wheel assembly onto the swivel shaft until it locks securely.
Press the square button on the wheel holder and pull the assembly off the swivel shaft.
Lift swivel lock levers up to lock or push down to unlock front wheels.
Push brake levers down to engage and lift them up to release the brakes.
Push guardrail onto posts until it locks; check for secure attachment.
Press recline button and move backrest to upright or full recline positions.
Buckle and unbuckle the 5-point harness, ensuring secure fit for the child.
Thread shoulder straps through upper or lower loops for optimal height.
Lock wheels, release latch, tilt, and fold stroller inward to latch.
Unbuckle harness, unzip base, and pull cushion off stroller.
Attach velcro, zip seat pad, and insert harness straps through slots.
Secure shuttle attachments, recline backrest, and lock infant seat onto stroller.
Squeeze red lever on carrier back and lift upwards to release from stroller.
Secure connection attachments, recline backrest, and lock infant seat onto stroller.
Locate release lever and pull upward to unlock both sides of the infant seat.
Unhook fasteners and slide the basket off the stroller frame.
Wrap hook & loop fastener straps tightly around both sides of the handle tube.
Place boot over guardrail and secure with zipper for safety.
Clean stroller parts with mild detergent, avoid sun exposure, and lubricate wheels sparingly.
Addresses common issues like stroller not folding, difficult steering, or getting up curbs.
Covers defects in materials and workmanship for one year from purchase.
Excludes normal wear, damage from misuse, and limits consequential damages.
List of available replacement parts with prices for the Combi Flex stroller.
Instructions for ordering parts via mail or fax, including contact details.
General| Wheels | 4 |
|---|---|
| Harness Type | 5-point |
| Maximum child weight | 22 kg |
| Front wheels | Swivel |
| Brakes | Foot-operated |
| Canopy | Extendable canopy |
| Compatible with car seats | Yes (with adapters) |
