Attaching the Combi Connection Infant Seat
Connection Infant Carrier.
1. Locate the release lever and
both sides of the infant seat.
1. Pull the carrier attachment straps from behind the seat cushion.
2. After removing the Kid's Tray attach the Combi Connection
attachments by slipping them over the armrest pins until you
hear the plastic tabs click into position. Gently pull up on
attachment, to be sure it is secure.
3. Attach Kid's Tray. Pull up on the tray
to ensure it is secure.
4. Recline the backrest to the middle position or lower.
5. Attach Combi Connection infant seat to attachments and press
down until seat locks in place. Infant car seat MUST be secured
to stroller.
Bring the carrier attachment straps through the belt guides
located on each side of the infant seat/carrier and fasten the
buckle. (If the strap is the incorrect length, adjust as needed. To
adjust, thread fabric through each side of the buckle.)
- 8 -
To Next Page
Loading...
