Combi Flex - Infant Seat Attachment; Attaching the Combi Shuttle Infant Seat; Detaching the Combi Shuttle


- 7 -
 




1. Squeeze red lever located on the back of the
Combi Shuttle infant carrier while lifting carrier
upwards to release from stroller.
1. Pull the carrier attachment straps from behind the seat cushion.
2. After removing the Kid's Tray attach the Combi Shuttle
attachments by slipping them over the armrest pins until you
hear the plastic tabs click into position. Gently pull up on
attachment, to be sure it is secure.
3. Attach Kid's Tray. Pull up on the tray
to ensure it is secure.
4. Recline the backrest to the middle position or lower.
5. Attach Combi Shuttle infant seat to attachments and press down
until seat locks in place. Infant car seat MUST be secured to
stroller. 

 Bring the carrier attachment straps through the belt guides
located on each side of the infant seat/carrier and fasten the
buckle. (If the strap is the incorrect length, adjust as needed. To
adjust, thread fabric through each side of the buckle.)
