Combi Flex - Opening the Stroller; Release Latch; Open Stroller Body; Canopy Installation and Removal

- 3 -


1. Confirm the canopy is facing in the proper direction.
2. Fully insert the canopy holder (male) to the canopy holder
(female) until a click is heard.
3. Fasten the canopy velcro together around the handle (2
places).

Pull the velcro apart, squeeze the bottom of the canopy hold-
ers (male) and pull the canopy up from above the canopy
holder (female). This must be done on both sides of the
canopy to completely remove it.




from bending.




1. Release latch by pulling
it up.
2. Grip the handle on each side
with an underhand hold and turn
outward to open.
3. Push and hold the safety
lock lever to the left. Press
and hold release button
while lifting handle up and
snap stroller away from
you. It will open and lock
automatically into position.