14. Seat cushion snap
15. Seat reclining buckle
16. Reclining cord
17. Back ventilation window
18. Safety lock
19. Folding lever
20. Top window
21. Top window cover
22. Ventilation window
23. Shoulder belt
24. Shoulder belt insert outlet
25. Head support insert outlet
26. Waist belt insert outlet
27. Waist belt
28. Crotch belt
29. Crotch buckle
30. Shoulder and waist belt buckle
31. Head support
32. EggShock pad
33. Body & Hip support
34. Handle lock
3
5. Open/Fold lock
36. Rear leg latches
37. Rear stay
38. Carrying grip
1. Handle
2. Adjustable button
3. Front guard buttons
4. Front guard
5. Front guard cover
6. Basket
7. Foot rest
8. Swivel wheel lock
9. Seat cushion
10. Headrest
11. Armrest
12. Stopper
13. Canopy snap
Unfolding/Opening (Figure 1.1)
Slide the safety lock as demonstrated direction and hold it in place.
Grip and pull the folding lever upwards simultaneously.
Slightly lift the stroller and open it.
Using the swivel wheels (Figure 1.2)
To use the swivel wheels - Lift the swivel wheel locks (left and right) to release.
(according to the moving direction).
Swivel wheels not in use - Press down the swivel wheel locks (the ones at the same
direction of the user) to lock.
WARNING:
When reversing the handle, please release swivel locks (total 4 places). When
the wheels are locked in the wrong direction, the stroller may damage to the
parts while open.
When you switched the normal use or handle, please make
sure to raise the swivel wheel locks to release the locks. If you do not release
the locks
, there is a possibility that the wheels are not automatically switched.
Using the stoppers (Figure 1.3)
To lock wheels, press the stoppers down which are located at wheels on both left and
right sides.
Try to push the stroller back and forth slightly to ensure that the stoppers are properly
engaged.
WARNING:
Always engage the stoppers when you leave the stroller.
Release the stoppers (Figure 1.4)
Lift the stoppers to unlock.
Open the front guard (Figure 1.5)
Press and hold the button at the end of the front guard as illustrated.
Detach the front guard.
Attach the front guard (Figure 1.6)
To attach front guard, lift and plug into the projected part at the end of the armrest.
The handle grip is returned to the straight position while pressing both adjustable button.
※Handle grip is folded in sales package.
To Next Page
Loading...
