Combi I-Thruller - Maintenance and Cleaning

Attaching the shoulder belt cover ( Figure 8.1 )
Remove the safety belt from the buckle. Pull the shoulder belt through the shoulder belt
cover.
Attaching the crotch belt cover ( Figure 8.2 )
Pull the crotch belt through crotch belt cover, pull out the buckle button.
Hints for maintenance
• Never apply force on any mechanism or moving parts.
• To prevent mildew forming, do not store this product when wet or in a humid environment.
• Protect the product from rain, snow and prolonged exposure to sunlight.
• Clean the plastic and metal parts with a wet cloth. For stubborn stains, use a diluted mild
detergent.
• You may lubricate moving parts if the operation or movement of the stroller is not smooth.
Do not apply excessive lubricant as it may lead to a build up of dirt which may cause
malfunction.
Cleaning and maintaining fabrics
• Always following the washing instructions listed below as well as those attached to the
various fabric parts.
• Dry the fabric parts completely before using or storing it.
• Hand wash in warm water.
Fabric care guidelines
• Hand wash in warm water.
• Do not tumble dry.
• Do not dry clean.
• Do not bleach.
• Do not iron.
Attaching the insert plastics (Figure 8.3)
Pull the belt in the direction as illustrated to attach the insert plastics.
Note: Always leave at least 3cm at the belt end.