D Button- works with the back arrow button. Deletes your history on
the last viewed channels.
Voice Button- allows you to access the X1 system without hitting any
other button. Simply hold the voice button until the led light on top of
remote is blue or TV says “Listening”, say a command then release the
button.
I Button- allow you to access the info about the channel or program.
Pairing remote to TV And Audio System
1. Turn on your TV.
2. Press and hold the xfinity and Mute buttons together for
five seconds until the light at the top changes from red to
green.
3. Type the first five-digit code for the TV manufacturer
• If the remote light blinks green twice, the code is
correct
• If the remote light blinks red then green, the code is
incorrect.
4. Aim the remote at the TV, and press the Power button
• If the TV turns off, turn the TV back on and make
sure the Volume and Mute buttons work.
• If the TV doesn't turn off, try the next code.
To Previous Page
Loading...
