Need help?Do you have a question about the Comcast XCAM2 and is the answer not in the manual?
General| Brand | Comcast |
|---|---|
| Model | XCAM2 |
| Category | Security Camera |
| Language | English |
Introduces the xCam2 as a True Day/Night IP camera with HD resolution and 802.11ac WiFi connectivity.
Details features like Standalone Design, Dual Video Compressions, IR LED Support, and suitability for various environments.
Describes the 802.11ac Wireless Standard support for the xCam2, including MU-MIMO.
Identifies front panel components: Light sensor hole, IR LEDs, Light Sensor, Lens, and POWER indicator.
Explains IR LEDs provide illumination at night or in dark environments for better video quality.
States the light sensor supports automatic day/night mode transition.
Notes no physical adjustment is possible, but lens cleanliness affects image quality.
Describes the states of the POWER indicator: On, Flashing, 2-Way Voice.
Identifies rear panel components: RJ-45 Jack, Reset Button, Microphone, and Speaker.
Used for power connection in wireless mode or with a PoE splitter.
Explains its function for rebooting and restoring factory default values.
States the built-in microphone is located on the front of the device.
States the built-in speaker is located on the rear of the device.
Shows the XW4 device and lists its ports and indicators.
Connects to the xCam2's RJ-45 jack for power feed and data exchange.
Resets to manufacturer default values and reboots the device.
Used to create an encrypted wireless connection with another device.
Describes the states of the POWER indicator: On, Flashing.
Specifies requirements for wireless devices to be compliant with IEEE802.11abgnac.
Guides on the installation procedure when using xCam2 for the first time.
Details the process of adding the xCam2 to the network via the Touch Panel, including initial steps.
Continues the steps for adding the xCam2, including connecting cables, verifying the camera, and checking the live stream.
Shows the physical connection and placement of xCam2 and XW4.
Lists steps: move xCam2, connect PoE cable, plug XW4, check power LED.
Details using a drill for holes, anchors, and screws to secure the xCam2 to the wall.
Provides recommended steps for mounting, including adjusting the angle and securing the camera.
Advises on limiting exposure to rain, using overhangs, and indoor use of XW4.
Lists specifications for xCam2 and XW4, including model, dimensions, temp, compression, interface, etc.
Details FCC regulations regarding radio frequency energy and interference.
States compliance with FCC RF exposure limits and operating conditions.
To Next Page
