CDX2000 / 13.56 MHz & 400 kHz Manual
© 2006 Comdel, Inc.
8
E. Environmental Specifications
Operating Temperature & Humidity
Operating range:
+10 to +40° C (50 to 104° F) ambient, 5-85% R.H. (non-
condensing, no formation of ice), 86-106 kPa.
Temperature, humidity and air pressure operating range
class 3K3 per prEN50178.
Cooling Inlet Air:
+5 to +35° C max (41 to 95° F)
Inlet Water Cooling Requirements:
6 l/m (1.6 GPM) @ 414 kPa (60 psi) max, +5° to max
25° C (40° F to 77° F)
Coolant type: Water
Storage and Transportation
Storage temperature/humidity/air pressure:
-25 to +70° C (class 1k4 per prEN50178), 5 - 95%
humidity (non-condensing, no formation of ice, class 1k3),
70-106 kPa (class 1k4).
Transport temperature/humidity/air pressure:
-25 to +70° C, 5 - 95% humidity, 70-106 kPa
(class 2k3).
This equipment has been designed to be compliant with FCC Part 18 emission standards for EMI/RFI
radiation. Radiated emissions shall also not exceed maximum levels permitted by ANSI C95.1-1982 standards
on safety levels with respect to human exposure to RF and electromagnetic fields from 300KHz to 100GHz.
F. Testing Specifications
Production Acceptance Test: Each unit will be required to "pass" production acceptance testing and a "Final
Test Report" will be generated to document results.
Production Acceptance Testing process shall include as a minimum: Complete Parametric/Functional Tests
covering: line regulation, calibration, linearity, burn-in, over-temp test, open circuit test, MAX power test,
harmonic distortion, AC ripple, and remote interface tests. Data sheet for each generator to be shipped with unit.
G. Packaging & Shipping Specifications
1. Accessories Supplied
• Final test results
• Operating manual
2. Shipping
NOTE: If there is a conflict between this document and customer Purchase Order then the latter
supersedes.
NOTE FOR REPAIRS: Unless repairs have accessories included with them and have them listed on
the Return Material Authorization (RMA) Tag, returned materials will not have to fulfill procedural
requirements for accessories.
To Next Page
Loading...