To Next PageTo Next Page
Need help?Do you have a question about the Comelit 41CPE012EN and is the answer not in the manual?
General| Power Supply | 12V DC |
|---|---|
| Connectivity | Wired |
| Category | Security System |
| Model | 41CPE012EN |
| Brand | Comelit |
| Material | Plastic |
| Color | White |
| Operating Voltage | 12V DC |
| Weight | 0.5 kg |
Provides an overview of the Atena Easy addressable fire alarm panel's capabilities.
Details the panel's overall technical specifications and features.
Instructions for securely mounting the fire alarm panel on a wall.
Lists and describes the various components that make up the fire alarm system.
Guides on connecting various signaling devices to the panel's outputs.
Details the procedure for connecting the panel to the main AC power supply.
Guides on connecting the backup accumulator battery for power resilience.
Instructions on connecting an optional heat printer for logging and diagnostics.
Describes how to connect a network module for system integration and monitoring.
Outlines the process of programming the panel using dedicated PC software.
Explains how to program the panel directly using its front panel controls.
Covers the procedures for updating the panel's internal software.
Provides an overview of the panel's programming structure and operational modes.
Explains the different user access levels and their corresponding codes.
How to view and review active alarm events displayed on the panel.
Instructions for reviewing detected fault events within the system.
Guide on how to check for and review system disablements.
Procedure for reviewing the status of ongoing system tests.
How to review warning messages generated by the system.
Steps to silence the panel's internal buzzer.
Procedure for silencing activated sounders after an alarm.
How to manually trigger an evacuation alarm sequence.
Steps to reset the panel to normal operation after an event.
Performing a general test of all panel LEDs, buzzer, and display.
Accessing and reviewing the system's event log file.
Managing and configuring individual zones within the fire alarm system.
Managing and configuring individual addressable devices connected to the panel.
Procedures for assigning addresses to devices in the system.
Configuring the behavior and status of the panel's various output terminals.
Accessing common panel settings and configurations.
Setting up panel parameters for operation within a redundant network.
Configuring individual panel settings within the redundant network.
