Comelit 41CPE012 User Manual

Attention:
This manual contains information on limitations regarding product use and function and information
on the limitations as to liability of the manufacturer. The entire manual should be carefully read.
The information in this manual is a subject to change without notice!
ATENA EASY
41CPE012EN
METALLIC ADDRESSABLE PANEL
INSTALLATION MANUAL

Comelit 41CPE012 Specifications

General

Brand	Comelit
Model	41CPE012
Category	Security System
Language	English

Summary

Installation

Connecting to the Main Power Source

Connecting to the Main Power Source

Procedure for connecting the panel to the main 230V power supply.

Connecting the Accumulator Battery

Connecting the Accumulator Battery

Instructions for connecting the backup accumulator battery to the panel.

Programming Types

Programming via AtenaProg Software

Using the AtenaProg software for panel configuration via PC.

Programming via Panel's Keyboard

How to program the panel directly using its front panel buttons.

Firmware Update

Procedures for updating the panel's firmware.

Firmware Update from Computer

Firmware Update from Computer

Steps to update firmware using a computer via USB.

Firmware Update from USB Drive

Procedure for updating firmware from a USB drive.

Full Hardware Reset

Full Hardware Reset

Procedure for performing a full hardware reset to restore factory settings.

Programming of Atena Easy Fire Alarm Panel

Codes and Access Levels

Details on user, maintenance, and installer access levels and their codes.

Description of the Operation Modes

Panel Operation Functions

Activate Evacuation

How to manually activate the evacuation alert for the sounders.

Description of the Programming Menus

View History Log Menu

Accessing and reviewing the system event log file.

Zones Menu

Zones Testing

Procedure for testing individual zones or all zones in the system.

Zone Configuration and Operation

Disabling Zones

How to disable or enable zones, preventing them from signaling alarms or faults.

Programming Zone Parameters

Setting parameters for each zone, including name, mode, and delays.

Zone Timing and Grouping

Programming Delays T2

Setting time delays for sounder and FIRE output activation.

Devices Setup Menus

Device Management

Saving the New Found Devices

Procedure for saving newly detected devices in the system configuration.

Device Correction and Parameterization

Programming of Device Parameters

Setting specific parameters for different types of addressable devices.

Addressing Menus

Set Address

Procedure for manually setting addresses for new devices.

Change Address

How to change the existing address of a device.

Self-Addressing

Performing the self-addressing procedure for multiple devices.

Autoaddressing

Autoaddressing

Using the auto-addressing procedure to assign addresses to devices.

Panel Outputs Menus

Sounders Outputs

Enabling/disabling sounder activation and setting time delays.

Fire Output

Enabling/disabling fire output and setting time delay.

Output Configuration

Relay Outputs

Setting parameters for the four programmable relay outputs.

General Settings Menu

Access Codes

Changing installer and maintenance access codes and setting auto-exit.

Date, Time and Modes

Setting the Date and Time

Setting the current date and time for the panel and enabling battery backup.

Setting Day/Night Alarm Modes

Configuring the panel's alarm mode to DAY, NIGHT, or SCHEDULE.

Panel and Sounder Settings

Sounders Mode

Configuring sounder operation modes, alarm tones, and evacuation settings.

Save Configuration Menu

Save Configuration Menu

Saving the current system configuration and new device settings.

Restore Defaults Menu

Restore Defaults Menu

Resetting the system configuration to factory default settings.

Network

Network Settings

Panels Settings

APPENDIX D

Two steps of alarming Algorithm.

APPENDIX E

Tree structure of the programming menus.