Maintenance
Cleaning and disinfection
Before transporting the monitor, or when you clean the device, please observe the following precautions:
• Please dilute detergent and disinfectant as specified in the user manual, or use a concentration as low as
possible.
• Never allow any liquid to flow into the housing or on the screen internal parts.
• Never pour any liquid onto any part or accessory of the device.
• Never soak the device in any liquid.
• Do not use any frictional material, bleaching powder or strong solvent.
Cleaning steps:
1. Power off the device, and unplug the power cord.
2. Use a soft cloth dipped with an appropriate amount of detergent to wipe the housing of the device.
3. Use a soft cloth dipped with an little amount of detergent to wipe the display screen of the device.
4. When necessary, you can use a soft, dry cloth to remove residual detergent.
5. Put the device in a cool, well-ventilated environment to air-dry it.
The disinfection operation may harm the monitor to a certain extent. It is suggested that the device can be
disinfected only when it is considered necessary in the maintenance plan of the hospital. Before disinfection,
please clean the device first. The selectable detergents are listed clearly in the user manual: chapter:
Cleaning and maintenance.
To Next Page
Loading...
