This manual is divided into two separate parts.
The rst part is for use by both the end user and the Skilled Technician; the second part is only for
use by the Skilled Technician.
The Skilled Technician can be:
The manufacturer of the machine (e.g. motor driven pump) which incorporates the pump (from
here on, “machine which incorporates the pump” may also stand for “system which incorporates
the pump”, as in the case of a pumping station, for example);
a person, generally from the service centre, who has received appropriate training and is authorised
to carry out special maintenance and repairs on the pump and on the machine which incorporates
the pump. Any work on its electrical parts must be carried out by a Skilled Technician who is
also a Quali ed Electrician, i.e. a person with professional training who is authorised to check,
install and repair electrical equipment correctly and according to current regulations in the country
where the pump is installed.
Congratulations for choosing one of our products! We would like to remind you that we took the
safety of the operator, the ef ciency of its use and the protection of the environment into great
consideration when designing and manufacturing this product.
In order to preserve its features over time, please read and follow this manual carefully.
Particular attention must be awarded to the parts with the following symbol:
as they contain important instructions regarding safety when using the pump.
The Manufacturer is not liable for damage caused by:
failure to comply with these instructions and the instructions for the machine which incorporates
use of the pump not included in the list in the “DESIGNATED USE” section;
failure to comply with current safety regulations and regulations for the prevention of accidents
in the workplace when using the pump;
failure to carry out the anticipated maintenance;
modi cations or actions without prior authorisation by the Manufacturer;
use of non-original or non-speci c spare parts for this model of pump;
repairs which were not completed by a Skilled Technician.
The guarantee is valid for a period of 24 months from the date on the sales document (receipt,
invoice etc.) provided the guarantee certi cate included with the documents for the pump was sent
back to the Manufacturer within 10 days of the purchase date with all its parts lled in.
The purchaser has sole right to the replacement of the parts which the Manufacturer, or his authorised
representative, deems faulty as regards their material or manufacture. This does not imply any
right to compensation for any type of direct or indirect damage. Any costs for labour, packing and
transportation are at the purchaser’s expense.
Should the product be sent to the Manufacturer for repairs under this guarantee, it must be complete
with all its original parts and not be tampered with upon arrival. Any request under this guarantee
To Next Page
Loading...
Need help?
General
