Comet IDS 1401 - Page 47

46
MP 20-30
P 48
P 48 AP
STD
STD
STD
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(6)
(6)
(4)
(4)
(4)
(4)
(3)
(5)
(5)
(4)
(4)
(4)
STD = Standard
VA = Version available
AP = Through Shaft Version
(1) = Available with appropriate kit
(2) = Pulley available: 2 channels A Øp 247; 2 channels A Øp 292
(3) = Reducer available: 1:1.66; 1:2.5; 1:8.89; 1:5.09; 1:6.44
(4) = Contact the dealer or Manufacturer for information on the correct kit to be used
(5) = Reducer available: 1:1.66; 1:2.5; 1:6.44; 1:5.09
(6) = Pulley available: 2 channels A Øp 172; 2 channels A Øp 247; 2 channels A Øp 292; 2 channels B Øp 290;
2 channels B Øp 350
Flanges for agricultural
machinery
Non-through shaft with 6 holes
Non-through shaft with 6 holes
and 1”3/8F Cardan
Through shaft 1”3/8M Cardan
6 holes and 1”3/8F Cardan
Through shaft Ø 25 mm
6 holes
Non-through shaft 1”3/8
male Cardan
Through shaft 1”3/8M Cardan
1”3/8M Cardan
Non-through shaft
cylindrical 30 mm Ø
Through shaft 1”3/8M Cardan
cylindrical 30mm Ø
Quick Coupling 1”3/8F Cardan
Pulley
Hydraulic Motor SAE
flange with two holes
Reducer
Overdrive