3
Main Components
Ⅲ
ⅢⅢ
Ⅲ. Installation
Complete kit installation
To install the complete kit, you need to amount the winch, roller fairlead, solenoid, remote socket
and trigger switch. Read and understand the following instruction to choose the proper mounting
locations.
1: Winch Ass'y with Wire Rope
2: Remote Control
3: Trigger Switch Ass'y (ATV-3000 only)
4: Remote Socket
5: Solenoid CES-2012
6: 6 Gauge Battery Lead
7: 4 Way Roller Fairlead
8-1 Mounting Plate (for ATV-3000)
8:
8-2 Mounting Plate (for UTV-4000)
9-1 Snatch Block (for ATV-3000)
9:
9-2 Snatch Block (for UTV-4000)
10: Handlebar Hardware (ATV-3000 only)
11: Mounting Hardware
To Next Page
Loading...
