Comfee CDC22P4AWW User Manual

18
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is recommended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to Electrical Connection.
Make sure that the water supply is properly set up.(i.e water turned on or bucket
filled)
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Cancel
button, the dishwasher will start its cycle.
Changing The Program Once Started
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the instructions
below:
1. Press and hold Start/Cancel for more than 3 seconds, the machine will drain 60
seconds. Then the machine will be in stand by state.
Press a new program button to select the desired program.2.
3. Press the Start/Cancel button, the dishwasher will start.
Running
Time(min)
Water
(Gal)
Description
Of Cycle
Program
85 2.64
Mainwash(149℉)
Rinse
Rinse
Rinse
Rinse(158℉)
Drying
SELF
CLEANING

Comfee CDC22P4AWW Specifications

General

Brand	Comfee
Model	CDC22P4AWW
Category	Dishwasher
Language	English