Comfee CM-M201K BK - Pizza; Memory Function; Multi-Stage Cooking

EN-18
13.PIZZA
15. MULTI-STAGE COOKING
14. MEMORY FUNCTION
The steps are as follow:
• Auto cooking cannot work in the multi-stage cooking.
NOTE
1. Press "PIZZA " repeatedly until the number you wish appears in the display,
"4.0", "8.0", "14.0" Oz will display in order.
For example, press "PIZZA" once , "4.0" appears.
2. Press “ START/+30 SEC. " to cook, buzzer sounds once. When cooking
finishes, buzzer sounds five times and then turn back to waiting state.
At most 2 stages can be set for cooking. In multi-stage cooking, if one stage
is defrosting, then defrosting shall be placed at the first stage automatically.
1. Press "0/MEMORY" to choose memory 1-3 procedure. The screen will display 1,2,3.
2. If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue
to set the procedure. Only one or two stages can be set.
3. After finishing the setting, press "START/ +30 SEC." once to save the procedure
and turn back to the waiting states. If press " START/ +30 SEC." again, it will start
cooking.
Example: to set the following procedure as the second memory, that is memory
2. To cook the food with 80% microwave power for 3 minutes and 20 seconds.
a. In waiting states, press "0/MEMORY" twice, stop pressing until the screen displays
"2".
b. Press "TIME COOK" once, then press "3","2","0" in order.
c. Press "POWER" once , "PL10" display, then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then turn back
to waiting states. If you press "START/+30SEC." twice after step c, the procedure
will be saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press "0/MEMORY"
twice, screen displays "2", then press "START/+30SEC." to run.