Comfee CMGO 20SF Wdi - Operation & Functions

EN-17
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
1. Press " CLOCK/PRE-SET ", the hour figure flash;
2. Turn " " to adjust the hour figures, the input time should be within 0--23.
3. Press " CLOCK/PRE-SET ", the minute figures will flash.
4. Turn " " to adjust the minute figures, the input time should be within 0--59.
5. Press " CLOCK/PRE-SET " to finish clock setting. ":" will flash.
1. Clock Setting
1. Press the " Micro./Grill/Combi. " key once, and "P100" display.
2. Press " Micro./Grill Combi." repeatedly or turn " " to select the microwave
power "P100", "P80", "P50", "P30", "P10" will display in order.
3. Press " START/+30SEC./CONFIRM " to confirm.
4. Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5. Press " START/+30SEC./CONFIRM " to start cooking.
2. Microwave Cooking
NOTE
• If the clock is not set, it would not function when powered.
• During the process of clock setting, if no operation in 1 minute, the oven will
go back to the previous status automatically.
NOTE
the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
OPERATION & FUNCTIONS