Comfee CMGO 20SF Wdi - Page 47

EN-20
1. Set the clock first. (Consult the instruction of clock setting.)
2. Input the cooking program. Two stages can be set at most. Defrosting should not
be set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press " Micro./Grill/Combi. " once,"P100"will display;
b. Press " Micro./Grill/Combi. " again or turn " " to choose 80% microwave
power till "P80" display;
c. Press " START/+30SEC./CONFIRM " to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " START/+30SEC./CONFIRM ". Then do as
following:
3. Press " CLOCK/PRE-SET ". The hour figures flash;
4. Turn " " to adjust the hour figures, the input time should be within 0--23.
5. Press " CLOCK/PRE-SET ", the minute figures will flash.
6. Turn " " to adjust the minute figures, the input time should be within 0--59.
7. Press " START/+30SEC./CONFIRM " to finish setting. ":" will light, buzzer will
ring twice when the time arrives, then cooking will start automatically.
NOTE
clock must be set first. Otherwise, pre-set function will not work.
9. Pre-set Function
1. In waiting states, turn " " right to choose the menu from "A-1" to "A-8";
2. Press " START/+30SEC./CONFIRM " to confirm the menu you choose;
3. Turn " " to choose the food weight;
4. Press " START/+30SEC./CONFIRM " to start cooking;
5. After cooking finish, the buzzer sounds five times.
10. Auto Menu