1. Press the MODE button to select the DRY
mode.
2. Set your desired temperature using the
Temp or Temp button.
3.
Press
the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be changed in
DRY mode.
1.
Press
the MODE button to select the FAN
mode.
2. Press
the FAN button to select the fan
speed:
AUTO, LOW, or HIGH.
3.
Press
the ON/OFF button to start the
u
nit.
NOTE: The temperature cannot be set in
FAN mode. As a result, your remote
controller' s LCD screen will not display
the temperature.
How to Use the Basic Functions
FAN Operation
DRY Operation (dehumidifying)
1
3
2
1
2
3
REMOTE CONTROLLER ILLUSTRATION
27
To Next Page
Loading...
