12
Exhaust hose installation:
The exhaust hose and adaptor must be installed or removed
in accordance with the installation of the unit.
The duct can be compressed or extended moderately
accordin g to the installation requirements, but it is
preferable to ke ep the duct length to a minimum.
IMPORTANT:
DO NOT OVER
Fig.1 7
Note:
Cover the hole f or the adaptor cap when not in use.
Fig.16
COOL or AUTO mode
FAN
DEHUMIDIFY
or mode
Install
Rem ove
Fig
.
18
1. Install the window exhaust adaptor B onto the exhaust
hose as shown in Fig.1 Refer to the previous
pages for window kit installation.
2. Push the exhaust hose into the airoutlet opening along
the arrow direction(See Fig.1
6.
7).
18)
-
BEND THE DUCT (SEE Fig.
INSTALLATION INSTRUCTIONS
model no. MPPH-06CRN1-BI0 | contact us: 1.866.646.4332
To Next Page
Loading...
