To Next PageTo Next Page
Need help?Do you have a question about the Comfort Glow S39PT and is the answer not in the manual?
Early signs resemble flu; get fresh air. Some people are more affected.
Gases are odorless; odorant added fades. Gas may be present without odor.
Steps to take if you detect a gas smell, including shutting off supply and calling supplier.
Use only provided logs; do not modify logs or add unauthorized items.
Ensure the heater screen is securely in place before operation.
Follow specific cleaning procedures to prevent soot formation.
Turn heater off before using cleaning products to avoid residue.
Adequate fresh air is required for proper operation and safety.
Proper ventilation is crucial for safe operation in confined or tight spaces.
Guidelines for ensuring sufficient fresh air supply for combustion and ventilation.
Emphasizes the need for professional installation to ensure safety and compliance.
Lists prohibited installation locations for safety reasons.
Mandates connection by a qualified professional for safety.
Requires an external regulator for propane/LP connections.
Prohibits connection to private gas wells due to potential hazards.
Emphasizes leak testing after installation or servicing.
Prohibits open flames for leak detection; use fluid instead.
Warns against incorrect part placement or using unapproved parts.
Essential safety instructions to read before attempting to light the heater.
Critical warning about potential fire or explosion if instructions are not followed.
Pilot lighting requires manual operation following specific steps.
Procedure to check for gas leaks before lighting the pilot.
Step-by-step instructions if a gas leak is detected.
Warning against using tools on the gas control knob to prevent damage.
Advises against using the appliance if any part submerged, requires service.
Provides instructions for lighting the pilot and main burners.
Importance of proper grounding for electrical safety.
First step in operating the heater is to review safety information.
Steps to set the control knob to the pilot position.
Process for lighting the pilot using the ignitor button.
Hold control knob after pilot lights to ensure it stays lit.
Instructions for completely shutting off gas to the appliance.
Procedure to turn off burners while keeping the pilot lit.
Detailed steps for manual lighting when the ignitor is not functional.
Safety instruction to ensure the heater is off and cool before cleaning.
Importance of keeping critical areas clean for safe operation.
Warning about soot and damage from unclean primary air openings.
Safety warning to disconnect power and let cool before servicing.
Warning against using sharp objects to clean ODS/pilot, which can cause damage.
Troubleshooting steps for no spark from the ignitor.
Troubleshooting steps for spark but no ignition.
Troubleshooting steps for pilot going out after releasing knob.
Troubleshooting steps when the burner fails to light.
Troubleshooting when the heater unexpectedly shuts off.
Troubleshooting for gas odor when the control knob is off.
Troubleshooting for gas odor occurring during combustion.
General| Brand | Comfort Glow |
|---|---|
| Model | S39PT |
| Category | Stove |
| Language | English |
