EasyManua.ls Logo

Comfort Line Products STG-1 User Manual

Default Icon
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owners Manual
Models STG-1, STG-2, STG-3, and STG-4
Manufactured by:
Comfort Line Products, Inc.
2717 N. Tamiami Trail
N. Fort Myers, FL 33903
(888) 997-6366
(239) 997-6366
www.comfortlineproducts.com
Meijer.com
Question and Answer IconNeed help?

Do you have a question about the Comfort Line Products STG-1 and is the answer not in the manual?

Comfort Line Products STG-1 Specifications

General IconGeneral
BrandComfort Line Products
ModelSTG-1
CategoryHot Tub
LanguageEnglish

Summary

Owner's Manual and Model Information

General Warnings and Precautions

Important Safety Instructions

Installation, Grounding, and Bonding

Covers general safety, grounding terminals, and bonding lug connections for electrical safety.

Continued Safety Instructions

Electrical Connection and Protection

Mandates grounded receptacles, GFCI for 120V, and RCB/RCCB for 230V units.

Installation Guide

Site Preparation Essentials

Covers structural, electrical, and bonding requirements for spa placement.

Assembly Instructions

Initial Setup and Inflation

Covers unfolding the liner, connecting the inflation hose, and inserting the key lock pin.

Continued Assembly

Assembly - Connections

Water and Hose Connection Procedures

Guides on aligning and attaching water connections and hose connections.

Filling the Spa

Pre-Filling Preparations

Ensures the power pack is unplugged and removes protective caps from fittings.

Spa Filling Procedure

Instructions for filling the spa to the correct water level.

Continued Spa Filling

Power Up and Water Flow Check

Plug in the power pack and verify water flow from the return nozzle.

Operation Procedures

Pre-Operation Checks

Reminders to test GFCI, use grounded outlets, and avoid extension cords.

Temperature Control

Setting and Monitoring Temperature

How to display, set, and monitor the spa water temperature.

Continued Operation

Turbo Wave Blower Operation

How to use the turbo wave pump and troubleshoot air chamber issues.

Maintenance Schedule

Recommended Water Chemistry

Water Testing and Chemistry Ranges

Guides on testing water chemistry and lists ideal ranges for spa water.

Continued Maintenance

Adding Chemicals Safely

Chemical Addition Procedure and Warnings

Safe methods for adding chemicals, including dilution and blower activation.

Filter Cleaning Procedure

Filter Removal and Cleaning

Step-by-step guide to unplugging, disassembling, cleaning, and reassembling the filter.

Filter Reassembly and Seating

Ensures proper seating of the filter and o-ring during reassembly.

GFCI Operation and Testing

GFCI Test Procedure

Detailed steps for testing the Ground Fault Circuit Interrupter monthly.

GFCI Malfunction Handling

Instructions on what to do if the GFCI device does not function properly.

Service and Troubleshooting

Troubleshooting: Pump Not Turning On

Steps to diagnose why the turbo wave pump will not turn on, checking power and GFCI.

Continued Troubleshooting

Troubleshooting: Dirty Filter

Addresses no heat issues caused by a dirty filter and corrective actions.

Troubleshooting: Leaking Connections

Identifies common leak points at spa connections and provides checks for washers and fittings.

Troubleshooting: Air Bound Pump

Guides on bleeding air from the filter tank to resolve circulation and heating problems.

Troubleshooting: Power Pack Failure

Procedures to diagnose a faulty power pack, including GFCI and circuit breaker checks.

Troubleshooting: 'OH' Overheat Message

How to clear the 'OH' (overheat) message by cooling the water and resetting the system.

Limited Warranty Terms & Conditions

Warranty Coverage and Period

Defines the warranty duration, coverage extent, and non-transferability.

Related product manuals