Comfort Zone CZ220 Series - User Manual

Save These Instructions
www.comfortzoneproducts.com
CZ220 Series
Ceiling Mounted Heater
HARDWIRED INSTALLATION REQUIRED
This heater must be grounded and hardwired to a properly
sized current protection circuit breaker in accordance with
the (US) National Electric Code and local codes.
Description
• Adjustable Heat Settings
• Fan-Forced for Wide Heat Circulation
• Horizontal and Vertical Air Flow with Tilt Feature
• Sturdy Heavy Gauge Steel Body
• High Limit Thermal Cut-Out Switch

Summary

Product Overview and Installation

Hardwired Installation Requirement

Crucial safety and installation directive for hardwiring the heater.

Safety and Operational Guidelines

General Safety Information

Comprehensive safety instructions, including warnings and precautions for operation.

Specific Hazard Warnings

Detailed warnings covering shock, hot surfaces, fire hazards, and electrical safety.

Specifications and Mounting

Technical Specifications

Details on wattage, voltage, phase, amps, air throw, circuit breaker, and wire size.

Installation Clearances

Diagrams and requirements for wall, floor, and discharge clearances.

Operation and Setup

Control Panel Overview

Explanation of power indicator, thermostat settings, and caution light.

Mounting Bracket Installation

Instructions and figures for securely installing the heater mounting bracket.

Connection and Adjustment

Hanging the Heater

Steps for lifting and securing the heater into the mounted bracket.

Connecting Power

Guide for wiring the heater, including conduit and power block connections.

Maintenance and Warranty

Adjusting Air Flow

Instructions on how to swivel, tilt, and adjust louvers for optimal air circulation.

Care and Maintenance

Procedures for cleaning the heater exterior and internal components.

Limited Warranty Information

Details on the product's one-year warranty against defects.

Comfort Zone CZ220 Series Specifications