Jigsaw Quick Manual
1.Installation - mount your Jigsaw on the DIN rail, connect the power
supply, KNX and connect the Jigsaw to the network.
2. Download and install bOS Configurator on your PC. You can get
bOS Configurator on our web page:
https://www.comfortclick.com/BOS/Software/BOSConfig
3. Connect to the Jigsaw
3.1
3.2 Open bOS Configurator.
3.3 Click on the menu button on the top right corner and select Add.
By default, Access ID is the serial number of your Jigsaw. You can
find the serial number on the sticker on the side of your Jigsaw (e.g.
J1234). Access ID is a unique name for accessing the bOS Server.
This name enables adding profile and accessing your bOS Server,
without the need of knowing it's IP address.
Enter Username: User and Password: Pass and click OK.
4. Start creating your bOS configuration or open an existing configu-
ration.
Please check our support tools for more information on how to work
with bOS: www.comfortclick.com/Support
5. You can also see the list of all your other Controllers and edit their
settings under your account profile.
b) Connect remotely – if you are connecting to your Jigsaw
remotely via the Internet, port forwarding should be enabled on
your router. Port 443 (TCP) should be forwarded to your Jigsaw’s
local IP. More about port forwarding can be found in bOS Server
manual.
The procedure below is optional; it is required only if you want
to change your default Access ID and other access settings.
3.4 Enter your Access ID, User name and Password
KNX
cable
Power Supply
110-240 V AC
L N
- + KNX UTP
Jigsaw
UTP
cable
USB 1
USB 2
USB 3
USB 4
Reset
Edit Jigsaw Access Settings
e.g. “J1234”
1. Open bOS Configurator.
2. Click ... button under Building - License.
3. Click Edit button
ComfortClick
Demo
comfortclick12
https://89.212.118.366/
https://89.212.218.766/
Oce
3. Login to your account on ComfortClick web page
www.comfortclick.com
a) Connect locally - make sure that your PC with bOS
Configurator is connected to the same network as your Jigsaw
than follow the steps below.
4. You can now change your Server name, Access ID, Public
Address and Local Address.
To Next Page
Need help?
General