Need help?Do you have a question about the Comfortec C30 and is the answer not in the manual?
General| Brand | Comfortec |
|---|---|
| Model | C30 |
| Category | Indoor Fireplace |
| Language | English |
Details required minimum dimensions for the fireplace opening.
Lists gas input and output specifications for natural and propane gas models.
Covers installation by qualified personnel, heat warnings, child supervision, and prohibition of modifications.
Addresses venting inspection, keeping area clear, glass usage, fuel restrictions, and underwater component handling.
Details flue liner kit requirements and chimney condition for safe installation.
Mandates open dampers and sealed chimney cleanouts to prevent air leaks.
Provides step-by-step instructions for safely removing the glass door.
Mandates adherence to codes and requires shut-off valves and unions for gas lines.
Specifies natural gas supply pipe size, pressure, and leak detection procedures.
Details attaching the flue liner to the collar and re-installing the draft hood assembly.
Addresses specific fireplace opening dimensions and offset elbow installation.
Provides voltage, frequency, and wattage details for the factory-installed blower fan.
Emphasizes the importance of plugging into a properly grounded three-prong receptacle.
Highlights the necessity of sufficient combustion air, especially in tightly sealed homes.
Provides a step-by-step guide for correctly positioning the logs on the unit.
Instructs on placing ember material onto the front burner for a realistic effect.
Details critical safety checks, especially smelling for gas before lighting the appliance.
Outlines immediate steps to take if a gas leak is detected, including not using switches or phones.
Provides a step-by-step guide for lighting the pilot and main burner safely.
Step-by-step guide for lighting the pilot light using the gas control knob.
Instructions for turning off the main burner and the complete unit.
Explains the function of the flame modulating device for gas consumption control.
Describes the draft-relief opening and stresses keeping it unobstructed.
Outlines the procedure for testing chimney draw using a match or cigarette.
Instructions on starting and adjusting the fan speed control for operation.
Explains the function of the heat by-pass control for off-season comfort.
Provides guidance on cleaning the glass, noting condensation and paint curing effects.
Details how to adjust the pilot screw for a properly sized flame.
Provides a step-by-step procedure for safely removing the fan assembly.
Details the Model #C30TK Trim Kit including glass frame, grill, and faceplate.
Lists available Arched Door Kits in Polished Brass and Black finishes.
Describes the Model #C20ALK30 Chimney Liner Kit components.
Specifies required information (part number, description, model) when ordering parts.
Lists various components with their item numbers, quantities, part numbers, and descriptions.
To Next Page