3.1 Folding and unfolding steps
Folding (MS|3000)
- The scooter is parked in a flat position, and the large red sphere on
the right side is pulled up to fold successfully. Picture (1, 2, 3)
- After folding, you can pull the scooter direction bar to drag. If you
need to put it into the car or transport it, you can open the directional
bar quick release handle and rotate the loose nut to adjust to the
lowest height.
- Make sure the child seat is not open before folding.
Unfolding (MS|3000)
- Pull the handle of the small red ball below to release the folding lock
and pull it back and forth to complete MS|3000 expansion. (Picture 4,
5, 6)
3. Usage and Operation
11
Picture 3Picture 2Picture 1
Picture 6Picture 5Picture 4
To Next Page
Loading...