4. Battery and Charger
15
Usage of Charger
To charge the battery, connect the charger into the Wheelchair’s con-
trol socket then connect the charger to a power supply.
Follow these steps to complete the charging process:
Step 1: Make sure the electric wheelchair is powered off.
Step 2: Make sure the controller socket is not blocked.
Step 3: Make sure the battery and controller unit are connected.
Step 4: Connect the charger’s output plug to the socket below the
controller.
Step 5: Connect the charger’s main plug to the power supply. Once
connected, you will see a red light. This means that charging has
begun. An empty battery will be fully charged in 8 to 10 hours. DO
NOT charge the battery for more than 24 hours.
Step 6: To keep the battery life from being shortened, please charge
the battery at least twice per month if the wheelchair is not in use.
To Next Page
